Specification criteria, installation sequence and how to read a datasheet. What specifiers ask, answered with standard-based figures.
Two families of sheet vinyl that look alike on the surface and differ in everything underneath. If the project is a hospital, a school or a retail space, the decision comes down to four figures on the datasheet: wear layer, dimensional stability, TVOC emission and how the welded joint behaves.
Read the guide → Installation guideA hospital cannot take a floor installed “to get it done”: there is no room to shut a ward twice. This guide sets out the real site sequence —from reading substrate moisture to the last coved junction— and marks the point where most projects fall over.
Read the guide → Standards & datasheetsA datasheet is not read top to bottom: you read the five figures that decide whether the product survives the project, then everything else. This guide explains what each one means, how it is tested, and what documentation to have ready before the procurement committee asks for it.
Read the guide →